EGW Picatinny Rail Scope Mount Savage Long Action or 220 Slug Gun 0 MOA Rail

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 4.630"
Overall Length: 7.458"

This mount comes standard with a bevel on both sides making it ambidextrous.

This mount does NOT fit the 212

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger.

Savages without an accu-trigger will require our flat back mount (listed separately).

The middle spread is the distance between the two middle holes, center to center, on your receiver.

Our Long Action Round Back 0 MOA base is recommended by Savage for use with their 220 Slug gun. Savage will instruct you to order using our old part number #2120. The newly assigned part number for this item is #41100. Please order part number #41100 or #41101, which is a specific mount for the 220, if you are purchasing a mount for the Savage 220 Slug gun.

Our mount is drilled for and provided with 6-48 Hex Head screws. Some Long Action Savage guns (like the .338 Lapua or 110 BA) require 8-40 screws. We recommend the HD Savage Round Back Long Action part #80330 or #80332 for these. Our mount is counter-sunk for 8-40 screws. We are happy to provide 8-40 screws in place of the 6-48 screws at no additional charge, if you are capable of modifying the mount yourself. For a $10 manual charge, we are happy to drill the mount to accomodate the 8-40 screws for you. This manual work will delay the shipping of your order by approximately 3 weeks & you will need to contact EGW to place your order over the phone.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.